Climate & weather

NASA ABLE-3 Project

ABLE-3ATraceGasAircraftInSituElectraData is the in-situ trace gas data collected onboard the NASA Electra aircraft during the Arctic Boundary Layer Expedition - 3A (ABLE-3A) suborbital campaign. Data using grab samples, gas chromatography, and Laser Induced Fluorescence (LIF) are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Arctic Boundary Layer Expedition (ABLE 3) campaigns. ABLE 3 was broken into two sub-campaigns: ABLE 3A and ABLE 3B. ABLE 3A took place in the...

Listed for discovery. Access is provided by the original publisher under its terms.

Data coverage

ABLE-3ATraceGasAircraftInSituElectraData is the in-situ trace gas data collected onboard the NASA Electra aircraft during the Arctic Boundary Layer Expedition - 3A (ABLE-3A) suborbital campaign. Data using grab samples, gas chromatography, and Laser Induced Fluorescence (LIF) are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Arctic Boundary Layer Expedition (ABLE 3) campaigns. ABLE 3 was broken into two sub-campaigns: ABLE 3A and ABLE 3B. ABLE 3A took place in the Arctic and subarctic regions of North America and Greenland, while ABLE 3B took place in the north central and northeastern regions of Canada. ABLE 3 was focused on understanding the “early warning” response of the near-surface, organic, active layer to climate variability with a special emphasis placed on identifying the range of variables which might have a significant influence on the tropospheric O3 budged in the Barrow region. The ABLE 3 campaigns took place in the summer since the summer is critical to an assessment of the full impact of accumulated winter/spring pollutant loadings. Observations in the summer months could also determine if significant long-range transport and injection of pollutants occur. ABLE 3A took place July-August 1988, and ABLE 3B took place July-August 1990. To accomplish its objectives, the ABLE 3 science team deployed the NASA Lockheed Electra aircraft on both sub-campaigns. With over 50 total flights, ABLE 3 aimed to utilize the Electra aircraft to take measurements of methane (CH4), carbon monoxide (CO), carbon dioxide (CO2), nonmethane hydrocarbons (NMHC), acetic acid (HA), formic acid (HFo), nitric oxide (NO), nitrogen dioxide (NO2), total “reactive” nitrogen gas (NOy), nitric acid (HNO3), peroxyacetyl nitrate (PAN), peroxypropionyl nitrate (PPN), ozone (O3), and aerosol chemical composition and size distribution. Onboard the Electra, airborne UV Differential Absorption Lidar (DIAL) provided remotely sense data on the two-dimensional distribution of aerosols and O3. The results of ABLE 3 indicate that atmospheric chemical changes in arctic and subarctic regions may serve as unique early warning indicators of global changes. ABLE-3AMetNavAircraftInSituElectraData ABLE-3AMetNavAircraftInSituElectraData is the in-situ meteorology and navigational data collected onboard the NASA Electra aircraft during the Arctic Boundary Layer Expedition - 3A (ABLE-3A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Arctic Boundary Layer Expedition (ABLE 3) campaigns. ABLE 3 was broken into two sub-campaigns: ABLE 3A and ABLE 3B. ABLE 3A took place in the Arctic and subarctic regions of North America and Greenland, while ABLE 3B took place in the north central and northeastern regions of Canada. ABLE 3 was focused on understanding the “early warning” response of the near-surface, organic, active layer to climate variability with a special emphasis placed on identifying the range of variables which might have a significant influence on the tropospheric O3 budged in the Barrow region. The ABLE 3 campaigns took place in the summer since the summer is critical to an assessment of the full impact of accumulated winter/spring pollutant loadings. Observations in the summer months could also determine if significant long-range transport and injection of pollutants occur. ABLE 3A took place July-August 1988, and ABLE 3B took place July-August 1990. To accomplish its objectives, the ABLE 3 science team deployed the NASA Lockheed Electra aircraft on both sub-campaigns. With over 50 total flights, ABLE 3 aimed to utilize the Electra aircraft to take measurements of methane (CH4), carbon monoxide (CO), carbon dioxide (CO2), nonmethane hydrocarbons (NMHC), acetic acid (HA), formic acid (HFo), nitric oxide (NO), nitrogen dioxide (NO2), total “reactive” nitrogen gas (NOy), nitric acid (HNO3), peroxyacetyl nitrate (PAN), peroxypropionyl nitrate (PPN), ozone (O3), and aerosol chemical composition and size distribution. Onboard the Electra, airborne UV Differential Absorption Lidar (DIAL) provided remotely sense data on the two-dimensional distribution of aerosols and O3. The results of ABLE 3 indicate that atmospheric chemical changes in arctic and subarctic regions may serve as unique early warning indicators of global changes. ABLE-3AAircraftRemoteSensingElectraDIALData ABLE-3AAircraftRemoteSensingElectraDIALData is the remotely sensed Differential Absorption Lidar (DIAL) data collected onboard the NASA Electra aircraft during the Arctic Boundary Layer Expedition - 3A (ABLE-3A) suborbital campaign. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Arctic Boundary Layer Expedition (ABLE 3) campaigns. ABLE 3 was broken into two sub-campaigns: ABLE 3A and ABLE 3B. ABLE 3A took place in the Arctic and subarctic regions of North America and Greenland, while ABLE 3B took place in the north central and northeastern regions of Canada. ABLE 3 was focused on understanding the “early warning” response of the near-surface, organic, active layer to climate variability with a special emphasis placed on identifying the range of variables which might have a significant influence on the tropospheric O3 budged in the Barrow region. The ABLE 3 campaigns took place in the summer since the summer is critical to an assessment of the full impact of accumulated winter/spring pollutant loadings. Observations in the summer months could also determine if significant long-range transport and injection of pollutants occur. ABLE 3A took place July-August 1988, and ABLE 3B took place July-August 1990. To accomplish its objectives, the ABLE 3 science team deployed the NASA Lockheed Electra aircraft on both sub-campaigns. With over 50 total flights, ABLE 3 aimed to utilize the Electra aircraft to take measurements of methane (CH4), carbon monoxide (CO), carbon dioxide (CO2), nonmethane hydrocarbons (NMHC), acetic acid (HA), formic acid (HFo), nitric oxide (NO), nitrogen dioxide (NO2), total “reactive” nitrogen gas (NOy), nitric acid (HNO3), peroxyacetyl nitrate (PAN), peroxypropionyl nitrate (PPN), ozone (O3), and aerosol chemical composition and size distribution. Onboard the Electra, airborne UV Differential Absorption Lidar (DIAL) provided remotely sense data on the two-dimensional distribution of aerosols and O3. The results of ABLE 3 indicate that atmospheric chemical changes in arctic and subarctic regions may serve as unique early warning indicators of global changes. ABLE-3AGroundData ABLE-3AGroundData is the ground site data collected during the Arctic Boundary Layer Expedition - 3A (ABLE-3A) suborbital campaign. Data from the Harvard CO2 instrument and mist chambers are featured in this collection. Data collection for this product is complete. From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those were the Arctic Boundary Layer Expedition (ABLE 3) campaigns. ABLE 3 was broken into two sub-campaigns: ABLE 3A and ABLE 3B. ABLE 3A took place in the Arctic and subarctic regions of North America and Greenland, while ABLE 3B took place in the north central and northeastern regions of Canada. ABLE 3 was focused on understanding the “early warning” response of the near-surface, organic, active layer to climate variability with a special emphasis placed on identifying the range of variables which might have a significant influence on the tropospheric O3 budged in the Barrow region. The ABLE 3 campaigns took place in the summer since the summer is critical to an assessment of the full impact of accumul

Access & permitted use

Review the publisher’s documentation for availability, eligibility and permitted uses, including commercial analysis, model training and redistribution.

Creative Commons BY 4.0

Need help sourcing data?

Tell us your required fields, population, geography and time period. We can review suitable sources and licensing options.

Request sourcing help

Related data sources

Climate and weatherPublic download

NOAA Global Daily Climate Observations

Daily precipitation, temperature, snowfall and other surface observations from the Global Historical Climatology Network across international stations.

NOAA National Centers for Environmental Information
Climate & weatherExternal source; review access terms

(EXPERIMENTAL) NOAA FourCastNet Global Forecast System (FourCastNetGFS) (EXPERIMENTAL)

The FourCastNet Global Forecast System (FourCastNetGFS) is an experimental system set up by the National Centers for Environmental Prediction (NCEP) to produce medium range global forecasts. The model runs on a 0.25 degree latitude-longitude grid (about 28 km) and 13 pressure levels. The model produces forecasts 4 times a day at 00Z, 06Z, 12Z and 18Z cycles. Major atmospheric and surface fields including temperature, wind components, geopotential height, relative humidity and 2 meter temperature and 10 meter winds are available. The products are 6 hourly forecasts up to 10 days. The data format is GRIB2. The FourCastNetGFS...

NOAA
Geospatial dataExternal source; review access terms

10m Annual Land Use Land Cover (9-class)

This dataset, produced by Impact Observatory, Microsoft, and Esri, displays a global map of land use and land cover (LULC) derived from ESA Sentinel-2 imagery at 10 meter resolution for the years 2017 - 2024. Each map is a composite of LULC predictions for 9 classes throughout the year in order to generate a representative snapshot of each year. This dataset was generated by Impact Observatory, which used billions of human-labeled pixels (curated by the National Geographic Society) to train a deep learning model for land classification. Each global map was produced by applying this model to the Sentinel-2 annual scene...

Impact Observatory