Data coverage
Polar Radiant Energy in the Far InfraRed Experiment (PREFIRE) Atmospheric Properties from PREFIRE Satellite 1 COG (PREFIRESAT12B-ATMCOG) is retrieved from data collected by the PREFIRE Thermal Infrared Spectrometer (TIRS-PREFIRE) aboard PREFIRE-SAT1. Dual CubeSats each carry a PREFIRE Thermal Infrared Spectrometer (TIRS-PREFIRE), a push broom spectrometer with 63 channels measuring mid- and far-infrared (FIR) radiation from approximately 5 to 53 µm. Most polar emissions are in the FIR but have not been measured on a large scale. PREFIRE aims to fill knowledge gaps in the global energy budget by more accurately characterizing polar emissions. This information will then be assimilated into global circulation and other models to predict future conditions more accurately. PREFIRESAT12B-ATMCOG contains Cloud-Optimized GeoTIFF (COG) files that each contain a georeferenced rendering of retrieved column water vapor (CWV) values. Those CWV data values are computed from a single granule of PREFIRE Spectral Radiance (PREFIRESAT11B-RAD) data using an Optimal Estimation retrieval via a radiative transfer model with inputs from PREFIRESAT12B-MSK (cloud mask), PREFIRESAT1AUX-MET, and PREFIRESAT12B-SFC. The retrieved CWV values are only available for clear-sky conditions. As part of the rendering process, mean retrieved CWV values are computed for a global grid of raster elements (each approximately 2.23 km in width), based on which raster elements each PREFIRE ground footprint overlaps. This procedure is done in order to better visualize the PREFIRE data despite substantial overlap of adjacent along-track ground footprints – but it is important to remember that the individual PREFIRE ground footprints are much bigger (by about 80x, in terms of area) than each of the GeoTIFF raster elements. These cloud-optimized GeoTIFF images may be viewed using many geographic information systems (GIS), such as the freely available QGIS. Science data retrieval started July 24, 2024 and is ongoing. Currently, the geographic coverage is for latitudes between approximately 60° to 84° in both polar regions, although future releases may include data for all latitudes equatorward of about 84°. Within the orbital swath there are eight distinct tracks of data associated with the eight separate spatial scenes for each TIRS-PREFIRE. At the beginning of the mission, the approximate scene footprint sizes were 11.8 km x 34.8 km (cross-track x along-track), with gaps between each scene of approximately 24.2 km. The entire swath was about 264 km across. Note that the scene footprint and swath sizes quoted here are for the orbit altitude soon after launch. However, the footprint and swath sizes will slowly become smaller as the orbit altitude decreases with time. Similar CWV GeoTIFF renderings for the sister instrument aboard PREFIRE-SAT2 can be found in the PREFIRESAT22B-ATMCOG collection. PREFIRESAT12B-ATM Polar Radiant Energy in the Far InfraRed Experiment (PREFIRE) Atmospheric Properties from PREFIRE Satellite 1 (PREFIRESAT12B-ATM) contains several geophysical variables, such as atmospheric temperature and water content, retrieved from data collected by the PREFIRE Thermal Infrared Spectrometer (TIRS-PREFIRE) aboard PREFIRE-SAT1. Dual CubeSats each carry a PREFIRE Thermal Infrared Spectrometer (TIRS-PREFIRE), a push broom spectrometer with 63 channels measuring mid- and far-infrared (FIR) radiation from approximately 5 to 53 µm. Most polar emissions are in the FIR but have not been measured on a large scale. PREFIRE aims to fill knowledge gaps in the global energy budget by more accurately characterizing polar emissions. This information will then be assimilated into global circulation and other models to predict future conditions more accurately. PREFIRESAT12B-ATM contains column water vapor, temperature, pressure, and water vapor profiles, surface temperature, and surface pressure as derived from PREFIRE Spectral Radiance (PREFIRESAT11B-RAD) data using an Optimal Estimation retrieval via a Radiative Transfer Model with inputs from PREFIRESAT12B-MSK (cloud mask), PREFIRESAT1AUX-MET, and PREFIRESAT1SFC. Science data retrieval started July 24, 2024 and is ongoing. Geographic coverage is global, with the greatest concentration of data in the polar regions. Within the orbital swath there are eight distinct tracks of data associated with the eight separate spatial scenes for each PREFIRE-TIRS. At the beginning of the mission, the approximate scene footprint sizes were 11.8 km x 34.8 km (cross-track x along-track), with gaps between each scene of approximately 24.2 km. The entire swath was ~264 km across. Note that the scene footprint and swath sizes quoted here are for the orbit altitude soon after launch. However, the footprint size will slowly become smaller as the orbit altitude decreases with time. This data has a temporal resolution of 0.707 seconds and is available in netCDF-4. The atmospheric properties data for the sister instrument aboard PREFIRE-SAT2 can be found in the PREFIRESAT22B-ATM collection. PREFIRESAT22B-ATMCOG Polar Radiant Energy in the Far InfraRed Experiment (PREFIRE) Atmospheric Properties from PREFIRE Satellite 2 COG (PREFIRESAT22B-ATMCOG) is derived from data collected by the PREFIRE Thermal Infrared Spectrometer (TIRS-PREFIRE) aboard PREFIRE-SAT2. Dual Cs each carry a PREFIRE Thermal Infrared Spectrometer (TIRS-PREFIRE), a push broom spectrometer with 63 channels measuring mid- and far-infrared (FIR) radiation from approximately 5 to 53 µm. Most polar emissions are in the FIR but have not been measured on a large scale. PREFIRE aims to fill knowledge gaps in the global energy budget by more accurately characterizing polar emissions. This information will then be assimilated into global circulation and other models to predict future conditions more accurately.PREFIRESAT22B-ATMCOG contains Cloud-Optimized GeoTIFF (COG) files that each contain a georeferenced rendering of retrieved column water vapor (CWV) values. Those CWV data values are computed from a single granule of PREFIRE Spectral Radiance (PREFIRESAT21B-RAD) data using an Optimal Estimation retrieval via a radiative transfer model with inputs from PREFIRESAT22B-MSK (cloud mask), PREFIRESAT2AUX-MET, and PREFIRESAT22B-SFC. The retrieved CWV values are only available for clear-sky conditions. As part of the rendering process, mean retrieved CWV values are computed for a global grid of raster elements (each approximately 2.23 km in width), based on which raster elements each PREFIRE ground footprint overlaps. This procedure is done in order to better visualize the PREFIRE data despite substantial overlap of adjacent along-track ground footprints – but it is important to remember that the individual PREFIRE ground footprints are much bigger (by about 80x, in terms of area) than each of the GeoTIFF raster elements. These cloud-optimized GeoTIFF images may be viewed using many geographic information systems (GIS), such as the freely available QGIS.Science data retrieval started June 29, 2024 and is ongoing. Currently, the geographic coverage is for latitudes between approximately 60° to 84° in both polar regions, although future releases may include data for all latitudes equatorward of about 84°. Within the orbital swath there are eight distinct tracks of data associated with the eight separate spatial scenes for each TIRS-PREFIRE. At the beginning of the mission, the approximate scene footprint sizes were 11.8 km x 34.8 km (cross-track x along-track), with gaps between each scene of approximately 24.2 km. The entire swath was about 264 km across. Note that the scene footprint and swath sizes quoted here are for the orbit altitude soon after launch. However, the footprint and swath sizes will slowly become smaller as the orbit altitude decreases with time.Similar CWV GeoTIFF renderings for the sister instrument aboard PREFIRE-SAT1 can be found in the PREFIRESAT12B-ATMCOG collection. PREFIRESAT22B-ATM Polar Radiant E
Access & permitted use
Review the publisher’s documentation for availability, eligibility and permitted uses, including commercial analysis, model training and redistribution.
Creative Commons BY 4.0
Need help sourcing data?
Tell us your required fields, population, geography and time period. We can review suitable sources and licensing options.
Request sourcing help